You have unexposed 124 film, and no lab processes it, so this reel is the only way to develop those two rolls. Build and test it well before you shoot them.
- 124 film is ~83mm wide (3¼ × 4¼ image), discontinued 1961.
- The MOD54 won’t work. It’s a cage for six 4x5 sheets, not a continuous spiral, and a 124 roll is one strip about 26 inches long.
- The path is a 3D-printed reel in the Multi-Reel 3 body, which has the internal height to clear an 83mm reel.
- Start with the 101/122 reel for Paterson 3-reel tanks on Printables. 122 film is the same width as 124, so it should fit directly.
- Backup: Atech’s parametric Paterson-compatible reel set, also on Printables. It includes STEP files, so you can adjust the width yourself.
Print notes
- Opaque filament only. Natural PLA and translucent colors light-pipe and will fog your film.
- Black PETG over PLA — PLA softens around 130°F, and warm developer gets closer to that than you’d like.
- Open the film groove 0.1–0.2mm past nominal. Old film is curled and brittle.
- Dry-fit with a scrap strip cut to width before you trust a real roll in the dark.
Before printing: measure your actual film. 124 used a 3.716” spool vs 118’s 3.474”, so spool length varied even at the same film width.