Developing film

Negative troubleshooting

What a bad negative is telling you, and how to read edge markings and gaps.

What you see Cause
Thin, weak negatives Underdeveloped, temp too low, or underexposed
Dense, blocked highlights Overdeveloped or temp too high
Clear circular spots Air bubbles — tap the tank after agitating
Overall grey fog Light leak in the bag, or the film is old
Streaks off the frame edges Over-agitation
Crazed surface texture Big temperature swing between steps
Nothing at all on the film Fixer used before developer, or camera issue
Clear film with edge markings visible Camera problem, not developing — the film never got exposed
Uniform cloudy gray, edge markings visible, no frame borders, and gaps as gray as the frames Dead old film (age fog plus lost sensitivity). The camera can’t put density in the gaps, so this is the film.
Dense gray over the whole roll, no edge markings Fogged during loading, for example under a safelight with panchromatic film

Quick diagnosis: edge markings visible means development worked. Gaps clear means the film itself is fine, so look at exposure. Gaps cloudy means the film is fogged.

Look at negatives against a window before you judge anything. Dense-looking negatives often print or scan fine.